Test Details | |
Schematic | 6.3_LTC3406B - DVM ADVANCED.sxsch |
Test | VOUT=0.6V w NoCurves NoScalars NoSpecs|Bode Plot|Vin Maximum|Light Load |
Date / Time | 12/10/2015 5:52 PM |
Report Directory | suppress_spec_gen\VOUT=0.6Vw NoCurves NoScalars NoSpecs\Bode Plot\Vin Maximum\Light Load |
Log File | report.txt |
Screenshot | schematic.png |
Status | WARN |
Simulator | simplis |
Deck | input.deck |
Init | input.deck.init |
Warning File | input.deck.warn |
**************************************** <<<<<<<< Error Message ID: 5019 >>>>>>>> Periodic Operating-Pt Analysis: Unable to find a periodic operating point after 20 attempts. Check your input file for errors. A change in the initial condition may be necessary. The voltages of the following capacitors and the currents of the following inductors are the leading contributing factors to the non-convergence of the POP analysis. Inspecting these voltages/currents from the "POP progress output" may show the clues to the non-convergence. C1, X$U1.X$U3.C2, X$U1.X$U3.C1 |
|
Error File | input.deck.err |
**************************************** <<<<<<<< Error Message ID: 5039 >>>>>>>> The periodic operating point (POP) analysis has failed to converge. AC analysis will not be performed. |
|
Measured Scalar Values | |
Efficiency | 2263.39% |
Power(LOAD) | 57.9823m |
Power(SRC) | 2.56175m |
VLOAD | AVG 1.31721 MIN 1.14991 MAX 1.5 RMS 1.32108 PK2PK 350.09m |
LOAD
VLOAD
|
|
SXGPH File | simplis_pop7_264.sxgph |
SRC
VSRC
ISRC
|
|
SXGPH File | simplis_pop7_254.sxgph |
default
CLK
ILOUT
SW
VOUT
|
|
SXGPH File | simplis_pop7_259.sxgph |
Other SXGPH Files | |
clock#pop | simplis_pop7_246.sxgph |